Caring For Your Gemstone Jewelry

You have bought or received as a gift the most incredible piece of gemstone jewelry, now how to keep it that way. Caring for your gemstone jewelry is an essential necessity for any jewelry owner, as gemstones are a durable material, and they do require care, so that when handed down as heirlooms in the years to come, they are just as brilliantly remarkable as they are to you now, to be cherished forever.


Most transparent and hard gemstones can endure being cared for by simply cleaning the jewelry with mild nonabrasive hand detergent and a soft bristled toothbrush; then dried with a soft clean cloth. It is wise to place a soft washcloth in the sink covering the drain, as doing so will aid in preventing any gemstones from becoming chipped or falling down the drain while you are cleaning your jewelry.


Some would suggest using ultrasonic cleaners, while this may be the fastest method for cleaning your jewelry; it is also the quickest way to damage your gemstones. Be very careful when using an ultrasonic cleaner, make sure that your gemstones can withstand such cleaning before using this type of method.




Here are some suggestions for cleaning and caring for your gemstone jewelry.


•Use 2 cleaning bowls. One that has warm water plus the cleaning liquid and one that has only warm water to rinse.
Note: If you are using sinks, place a soft washcloth over the drains, this will help to keep stones from going down the drains and also help to prevent possible chipping.
•Use lukewarm water, never use hot water.
•Use a mild dishwashing liquid or mild jewelry cleaning solution. One that is safe for your specific jewelry gemstones and metals.
•Several soft, clean, dry cloths (1-for cleaning and 1-drying)
•Small, unused soft bristled toothbrush


The process is simple, fill your sink with warm water, add a little drop of mild dishwashing liquid and swish around to make bubbles. Carefully, place a few pieces at a time in the sink allowing them to soak a few minutes (don’t overload the sink as this may cause jewelry to hit against each other causing chips, cracks and/or damage). Then take each piece out and carefully clean with the soft bristled toothbrush.


Caution, you only need to use a toothbrush if you have a piece of jewelry that has tiny cracks, holes, and small places where dust and dirt can get in; otherwise, there is really no need to use a toothbrush. Rinse in a separate sink that only contains warm water. Place the jewelry on a soft cloth and carefully dry your jewelry pieces. As a side note, allow an hour or so for your jewelry to 'air dry' to make sure that all water is gone before placing back into their jewelry box or containers.


Cleaning your jewelry doesn’t have to be done often, but several times a year to protect your gemstones. As a rule of thumb and if in doubt, clean your gemstone jewelry with warm, soapy water. Avoid harsh chemicals or high heat which can cause gemstones to fade or crack. And try to store your gemstone jewelry in a clean jewelry case out of the reach of harsh light or sun to prevent fading and possible damage to your gemstones.


As a last note, it is also wise to have a jeweler check any gemstones that have been put in settings at least once a year. This is to make sure that the prongs are secure and your gems are safe. When in doubt, ask a professional jeweler about the care and cleaning of your new gemstone jewelry.

Tumble & Clean To Finish Wire Work & Jewelry

As jewelry designers and makers, silversmiths and wire worker, getting the right shine and cleaning of the jewelry is key to selling. But what is the best way, technique or even equipment to properly clean the jewelry and get it ready for the marketplace. Here are some common techniques and suggestions for tumbling and cleaning your jewelry in order to achieve that ‘perfect’ finished look for the marketplace.



Tumbling jewelry is the most popular and common method used by many people to clean their jewelry and harden wire or metal used in the jewelry. There are many different types on the market and range from side rotary barrels to vibrating bowl tumblers. But with so many different machines on the market, which ones are the best or most effective? I suggest first to ask around and get advice from fellow artisans, jewelry makers, silversmiths, and wire workers. As these individuals use tumblers on a daily and weekly basis and can give first hand experience/knowledge to the pros and cons in the use of their type of tumbler and method. There are many on the market and is just depends on how much and what you are doing as to what is your preference.



By tumbling the jewelry, it accomplishes several things; first it cleans the pieces and second it polishes or hardens the metals. I mentioned that there are two types, vibrating/bowl and rotary/barrel tumblers. They all come in a variety of sizes and capacity levels; depending on how much jewelry you are going to put in, depends on what type of tumbler you plan to buy. Do your research and make sure the capacity of the one you chose will do the job without marring, mangling or even breaking your jewelry.

With either of these methods, you will be using a type of tumbling media. Be sure to check that your tumbler can use water (mix in a drop of dish soap) or uses mixed stainless steel media. With the use of dish soap, this acts as a detergent that is good at lifting oil and grim from the surfaces of stones and gets into the small pockets of metals.

Once you have chosen and purchased your tumbler, use these easy tips with your jewelry.

*Put your jewelry in the bowl or barrel
*Add water to about 1” above the jewelry
*Add a drop of dish soap and put the lid back on, tighten and then turn it on

If using a barrel or tumbler that uses dry mix and no water, and then add a hand full of stainless steel mix or what is best for your tumbler, close and tighten lid, turn on.

I’ve found that many people will tumble their jewelry for different times. This is again your preference and will take some trial and error to determine what is best for you. Most people will suggest from 15 minutes to several hours. Depending on what I’m tumbling, I will do between 15-20 minutes, this has been best for my jewelry and tumbler.

Once complete, then pull your jewelry from the tumbler, rise in warm water and dry with a clean soft towel. I then will lay the jewelry out and allow to fully ‘air’ dry for several hours or over night.

Make sure to clean out and maintain the tumbler which ever kind you purchase. Check with the manufacturer for their cleaning and maintenance tips.

Good luck and happy tumbling!

Gemstone Jewelry Cleaning & Caring Guidelines

You have bought or received as a gift the most incredible piece of gemstone jewelry, now how to keep it that way! Caring for your gemstone jewelry is an essential necessity for any jewelry owner, as gemstones are a durable material, and they do require care, so that when handed down as heirlooms in the years to come, they are just as brilliantly remarkable as they are to you now, to be cherished forever.


Most transparent and hard gemstones can endure being cared for by simply cleaning the jewelry with mild nonabrasive hand detergent and a soft bristled toothbrush; then dried with a soft clean cloth. It is wise to place a soft washcloth in the sink covering the drain, as doing so will aid in preventing any gemstones from becoming chipped or falling down the drain while you are cleaning your jewelry.


Some would suggest using ultrasonic cleaners, while this may be the fastest method for cleaning your jewelry; it is also the quickest way to damage your gemstones. Be very careful when using an ultrasonic cleaner, make sure that your gemstones can withstand such cleaning before using this type of method.


Here are some suggestions for cleaning and caring for your gemstone jewelry.
·Use 2 cleaning bowls. One that has warm water plus the cleaning liquid and one that has only warm water to rinse.
Note: If you are using sinks, place a soft washcloth over the drains, this will help to keep stones from going down the drains and also help to prevent possible chipping.
·Use lukewarm water, never use hot water.
·Use a mild dishwashing liquid or mild jewelry cleaning solution. One that is safe for your specific jewelry gemstones and metals.
·Several soft, clean, dry cloths (1-for cleaning and 1-drying)
·Small, unused soft bristled toothbrush


The process is simple, fill your sink with warm water, add a little drop of mild dishwashing liquid and swish around to make bubbles. Carefully, place a few pieces at a time in the sink allowing them to soak a few minutes (don’t overload the sink as this may cause jewelry to hit against each other causing chips, cracks and/or damage). Then take each piece out and carefully clean with the soft bristled toothbrush.

Caution, you only need to use a toothbrush if you have a piece of jewelry that has tiny cracks, holes, and small places where dust and dirt can get in; otherwise, there is really no need to use a toothbrush. Rinse in a separate sink that only contains warm water. Place the jewelry on a soft cloth and carefully dry your jewelry pieces. As a side note, allow an hour or so for your jewelry to 'air dry' to make sure that all water is gone before placing back into their jewelry box or containers.

Cleaning your jewelry doesn’t have to be done often, but several times a year to protect your gemstones. As a rule of thumb and if in doubt, clean your gemstone jewelry with warm, soapy water. Avoid harsh chemicals or high heat which can cause gemstones to fade or crack. And try to store your gemstone jewelry in a clean jewelry case out of the reach of harsh light or sun to prevent fading and possible damage to your gemstones.

As a last note, it is also wise to have a jeweler check any gemstones that have been put in settings at least once a year. This is to make sure that the prongs are secure and your gems are safe. When in doubt, ask a professional jeweler about the care and cleaning of your new gemstone jewelry.