In wire working there are some specialty tools that enable a designer to create something unique and unusual. There are the usual tools as was posted previously, but also these special wire working tools to include wire twisters, coiling pliers, nylon jawed pliers (heavy), rosary pliers (heavy), and bail makers. You can find these online or through a vendor that carries special wire working tools.
Wire Twisters: These unique tools are used to twist short to medium pieces of wire using just one hand. If you are going to be combining more than 2 pieces of wire, or a bunch of wire twists, than an electric hand drill will also perform the same purpose, only much quicker.
Coiling Pliers: To make jump rings or wire loops, use coiling pliers that have one jaw that is flat and another that is in a 3-tier step making wire loops. This keeps you from marring your wire too much, as conventional convex/concave pliers can easily mar the wire as you turn loops or use as a bail maker.
Nylon Lined Jaw Pliers: These pliers are used to straighten wire or for bending, forming and shaping your wire. The nylon lined jaws keep the pliers from again, marring your wire. As you work with these pliers, the nylon jaws will need to be replaced over time as they can get cut up by the raw wire. (Tip: If you don’t want to buy a set of these pliers, then using blue painters tape wrapped around the ends of regular pliers will do the same thing. You have to replace the tape after each use.)
Rosary Pliers: These pliers are for working with every heavy gauge wire such as 14-16gauge. They are heavy pliers that are built not to slip when used in gripping, turning and twisting of the heavy gauge wire.
Bail Makers: Bail making pliers are usually rounded diameter cylinder pliers and come in different sizes. You can purchase several different sets of bail makers as each one will usually make 3 different size combinations, usually ranging from 1.5mm to 9mm bail or ring sizes.
These are just a few of the speciality tools used in wire working. Doing research on the internet, reading books and magazines or taking a class you can learn about many other speciality tools used in wire working.
Wire Twisters: These unique tools are used to twist short to medium pieces of wire using just one hand. If you are going to be combining more than 2 pieces of wire, or a bunch of wire twists, than an electric hand drill will also perform the same purpose, only much quicker.
Coiling Pliers: To make jump rings or wire loops, use coiling pliers that have one jaw that is flat and another that is in a 3-tier step making wire loops. This keeps you from marring your wire too much, as conventional convex/concave pliers can easily mar the wire as you turn loops or use as a bail maker.
Nylon Lined Jaw Pliers: These pliers are used to straighten wire or for bending, forming and shaping your wire. The nylon lined jaws keep the pliers from again, marring your wire. As you work with these pliers, the nylon jaws will need to be replaced over time as they can get cut up by the raw wire. (Tip: If you don’t want to buy a set of these pliers, then using blue painters tape wrapped around the ends of regular pliers will do the same thing. You have to replace the tape after each use.)
Rosary Pliers: These pliers are for working with every heavy gauge wire such as 14-16gauge. They are heavy pliers that are built not to slip when used in gripping, turning and twisting of the heavy gauge wire.
Bail Makers: Bail making pliers are usually rounded diameter cylinder pliers and come in different sizes. You can purchase several different sets of bail makers as each one will usually make 3 different size combinations, usually ranging from 1.5mm to 9mm bail or ring sizes.These are just a few of the speciality tools used in wire working. Doing research on the internet, reading books and magazines or taking a class you can learn about many other speciality tools used in wire working.
